#1 How is Camoclad produced?
This and a few other things are what really sets us apart form the copy cats and knock off's. Our camouflage graphics are screen printed. Camoclad camouflage graphics are professionally printed using modern screen printing equipment and methods. We print our graphics to 3M vinyl using 3M color ink system. Screen printing is widely recognized as the superior printing method for outdoor durability.

Electrostatic or thermal transfer printing methods used by the competition are weak and will not last.

#2 Will extreme heat or cold affect the Camoclad?
No, heat and cold will have no effect on properly applied Camoclad graphics. From the great Alaskan tundra to the deserts of the American southwest, Camoclad will continue to hold up and look great in all weather conditions.

#3 Will Camoclad fade?
Camoclad camouflage graphics carry a 4 year warranty against fading. Camoclad uses all 3M fade resistant inks. So far we have had Camoclad on for 10 years with no signs of fading.

#4 I want to camouflage my hunting truck, should I use the permanent or removable material?
We would definitely recommend our Removable material. In fact, all of our truck kits are offered in removable material only, and here's one reason why. It is a re-positionable adhesive which allows you to detach the sheet and reposition it if necessary before adhering it aggressively. In addition, it has been manufactured with 3M's Comply performance feature, which allows air to escape from beneath the vinyl, virtually eliminating wrinkles and bubbles. This adhesive syster also permits removal while leaving little or no residue.

#5 Can I Camoclad over rust spots?
Camoclad will not adhere properly to rust. You'll need to sand the rust smooth and apply primer paint, then apply the camo once the paint has thoroughly dried. If your truck needs some body work, just repair the damaged areas and spot paint with automotive primer.

#6 Will the dcals come off?
If properly applied, your Camoclad graphics should stay put in-definitely. However, problems may develop around the edges or curves where the vinyl has been stretched. When vinyl is stretched, it has a tendency to shrink back. So, when applying to convex shapes, use relief cuts and patch per the applications instructions. Shile you can wash your vehicle at a high pressure car wash, it's good advice to not aim the spray directly into the seams.

#7 Will Camoclad affect my vehicles paint job?
In most cases, Camoclad will not only make your vehicle look good, but also pretect your paint job. So if ou want to remove Camoclad in 3 or 4 years, your vehicle should look the same as the day you put it on. Camoclad has been applied to vehicles all over the world and, with few exceptions, when Camoclad has been removed, the paint is not affected and virtually no residue was left behind.

#8 How can I install Camoclad around corners without wrinkles?
Camoclad is made to not only adhere to your vehicle, but to itself as well. Therefore, you can cut the Camoclad and overlap it making for a nice, smooth finish. These cuts are called releif cuts and are used when you can't get around someting without wrinkling the material.

#9 Will bubbles form in the vinyl while I apply it?
Camoclad has added the Comply performance feature to minimize bubbles but if that happens, simply use a needle to poke a very small hole at teh base of the bubble, then push the air out with your thumb and it will look great. However, if you vehicle has been recently repainted, some bubbling may occur as a result of outgassing from the paint. To avoid this, allow at least 2 weeks for the paint to fully cure before applying any vehicle graphics.

#10 Will Camoclad withstand the abuse of daily driving?
Yes, and let me tell you, this stuff is tuff! It is durable and will withstand lots of abuse. As you can tell from some of the pictures and customer comments, Camoclad will stand up to barrel rolling down a hill, but the truck doesn't always make it.

#11 Can I use it on a boat?
Camoclad "permanent" was developed with boats in mind. Our customers have been successfully using Camoclad on boats and other watercraft for many years.

#12 What is the warranty on Camoclad?
Camoclad Camouflage is warranted for 4 years against fading of the material. The applicatoin of our products is not warranted because conditions will vary. However, with proper applicatoin, Camoclad has lasted 10 years and still counting.

#13 Does Camoclad offer pre-cut kits for my particular truck, boat, ATV or...?
Yes we do. We currently manufacture a pre-cut kit for Polaris ATV's. We also manufacture pre-cut kits for shotguns. We have plans to manufacture a variety of pre-cut kits in the near future.

#14 I've seen similar products and they all seem to have a glossy or shiny finish. Does Camoclad have a glossy finish?
Absolutely not! We manufacture Camoclad with our exclusive 3M approved clear coar for a no-gloss, no-glare, gasoline resistant finish. This is another area where we smoke the competition. However, if a glossy finish is desired, Camoclad has been designed to be receptive to automotive paints and can be professoinally cleared coated over.